Express Oil & Filter Change at West Coast Tire and Service

AUTOMOTIVE SERVICES

• Car Repairs
• Diagnosis
• Maintenance
• Oil Change
• Tune Up
• Wheel Alignment

Engine oil lubricates and removes heat from internal engine components. The oil filter removes harmful deposits from the engine oil, preventing them from being circulated throughout the engine.

Manufacturers differ in their recommended guidelines for when engine oil and oil filters should be changed. As a general rule, however, engine oil should be changed every 3,000 miles to keep the engine healthy and to prolong its life.

When changing or adding engine oil, follow the manufacturer's recommendation for the grade, often referred to as "weight" (0/30W, 5/30W, 20/50W, etc.), and type (petroleum or synthetic base) of oil to use. The grade based on the oils ability to flow - "viscosity". Using an incorrect type or grade may invalidate your manufacturer's warranty.

To change the oil and filter, the technician removes the drain plug at the bottom of the engine oil pan and drains the oil. The oil filter is then removed and replaced with a new one. The technician reinstalls the drain plug and fills the engine with fresh oil. The engine is started and checked for leaks. Finally, the technician switches off the engine, rechecks the the oil level, and resets the maintenance light.

During the oil change, we at West Coast Tire and Service do a free 20-Point safety inspection as well as a complimentary rotation of your tires if applicable.

Other components that are usually checked and changed if needed while performing an oil service are your Air Filters. Most vehicles have two different types of air filters. One filter is for the air that enters the engine and mixes with gas to create combustion. The other filter is called the AC cabin filter, used to filter the air coming through the air vents into the cabin.

Also see - Scheduled Vehicle Maintenance | 15,000 Miles | 30,000 Miles | 60,000 Miles